Choosing a faucet seems like such a simple task in the grand scheme of your kitchen makeover. However, when you start looking around, the vast selection of kitchen faucets can make it hard to narrow down your options. The best kitchen faucet should be simple to use, water efficient, durable and look stylish. So if you want to get the perfect look in your kitchen but have a hard time choosing the one that is really worth the money, you’ve come to the right place. Below are kitchen faucet reviews of the top 10 best rated products in 2021.

In this kitchen faucet comparison, we’ve featured products of different styles and setups, all of which come from the most reliable kitchen faucet brands. We looked at their features and specifications, and then researched hundreds of consumer reviews to see how they’ve stood up to time. At the end of the article, you’ll also find a comprehensive buying guide to help you zero down your options for choosing the perfect faucet for your kitchen.

Disclaimer: faucetsrated.com is supported by its audience. When you purchase through links on our site, we may earn a small commission at no extra cost to you.

• Moen Arbor 7594ESRS
• Material: metal
• Finish: oil-rubbed bronze, spot resist stainless, chrome
• Flow rate: 1.5 GPM
• Height: 15.5"
• Spout reach: 7-7/8"
• Swivel: 100 degrees
• Installation: 1 or 3 hole
• Modes: spray, stream
• Touchless: yes

Check on Amazon

• KOHLER K-596-VS Simplice
• Material: metal
• Finish: matte black, polished chrome, vibrant stainless
• Flow rate: 1.8 GPM
• Height: 16-5/8"
• Spout reach: 9"
• Swivel: 360 degrees
• Installation: 1 or 3 hole
• Modes: stream, spray, pause
• Touchless: no

Check on Amazon

• Delta 9113-AR-DST Essa
• Material: brass
• Finish: arctic stainless, venetian bronze, chrome, matte black
• Flow rate: 1.8 GPM
• Height: 15.75"
• Spout reach: 9.38"
• Swivel: 360 degrees
• Installation: 1 or 3 hole
• Modes: stream, spray
• Touchless: available with and without

Check on Amazon

• Kohler K-560-VS Bellera
• Material: metal
• Finish: oil-rubbed bronze, polished chrome, vibrant stainless
• Flow rate: 1.8 GPM
• Height: 16.75"
• Spout reach: 7-7/8"
• Swivel: 360 degrees
• Installation: 1, 2, 3 or 4 hole
• Modes: stream, spray, pause
• Touchless: no

Check on Amazon

• Delta 9178-AR-DST Leland
• Material: brass
• Finish: arctic stainless, chrome, stainless, spotshield stainless, venetian bronze
• Flow rate: 1.8 GPM
• Height: 14.88"
• Spout reach: 9.2"
• Swivel: 360 degrees
• Installation: 1 or 3 hole
• Modes: spray, stream
• Touchless: no

Check on Amazon

• Peerless P299578LF-SS
• Material: metal
• Finish: chrome, stainless
• Flow rate: 1.8 GPM
• Height: 12.5"
• Spout reach: 9"
• Swivel: -
• Installation: 4 hole
• Modes: stream and side sprayer
• Touchless: no

Check on Amazon

10 Best Rated Kitchen Faucets Reviewed

Delta 9113-AR-DST Essa

Delta 9113-AR-DST Essa is also one of the most popular kitchen faucets that have been receiving good kitchen faucet ratings from the users. It offers a combination of a contemporary sleek design, high functionality and a relatively affordable price. The soft, modern design with subtle detailed accents will make this inexpensive kitchen faucet a nice focal point of any kitchen.

Features:

• This is a pull-down faucet, so the spray wand pulls out for easier reaching big pots or small nooks of the sink. It has a reach of 20 inches, which provides great coverage over wide or double-basin sinks.
• You can switch from spray to stream function.
• The MagnaTite docking system uses a magnet to keep the wand firmly in place. When you raise the wand, the magnet retracts the wand to its docking place.
• The sprout also swivels 360 degrees, so you can have complete sink access.
• This kitchen faucet uses the Diamond Seal technology. We’ve mentioned this technology previously in the Delta Leland review. This technology features a diamond-coated valve that helps to prevent leakage and other wear of the faucet. The Diamond Seal is made to last up to 5 million uses.
• At 60 psi, the faucet can deliver a maximum flow of 1.8 GPM.
• The InnoFlex PEX system, which is a one-piece supply line system. It’s designed to eliminate leaks and prevent contact with potential metal impurities.
• For this Delta faucet installation, you have the option of mounting it on 1 or 3-hole sinks. The package of the faucet also comes with an optional deck plate.
• The exclusive Touch Clean spray nozzles allow easy wiping of the scale buildup with just a touch of a finger.
• ADA compliant.
• You can purchase it in 4 different finishes, choosing the perfect one to fit your kitchen decor: arctic stainless, chrome, matte black and Venetian bronze.

This modern kitchen sink faucet is also available with Touch2O technology if you would like hands free operation. But you must pay extra for it.

Also, keep in mind that this faucet is 15.25” in height, so it’s not as tall in comparison to some of the other faucets.

CHECK THE LATEST PRICE ON AMAZON

Other great kitchen faucets worth mentioning:

Kraus KPF-1612

How To Choose the Best Kitchen Faucet? – Buying Guide

Choosing the best kitchen faucet for the money and quality can be tricky. The market offers such a huge variety of styles, materials and finishes. All this can be really overwhelming. The kitchen faucet not only functions as the dispenser of hot and cold water but also plays a major role in defining the style of our kitchen design. So here are a few things you should consider before buying a new kitchen faucet.

Design

You might have a specific style in mind but once you’ll install, it might completely clash with your kitchen decor. So it might not be a good idea trying to install an old-fashioned kitchen faucet in a modern kitchen or vice versa. When checking different designs, also consider any functional issues. For example, if you have a tight space, make sure that the faucet will be able to operate correctly.

The best kitchen faucet should blend in with the elements surrounding it or it can also stand out, though within the kitchen style. Find a beautiful kitchen faucet that will compliment your kitchen. You don’t want your faucet to become an eyesore for everyone. Most of the faucets fit either transitional, traditional or contemporary style.

1. The traditional style is the most compatible one. They usually feature a quiet, simple design that comfortably fits the design of the kitchen. However, even though this style looks the safest, it’s also often misused.
2. Transitional style sits somewhere in the middle and these type of kitchen faucets don’t usually become the centerpiece of the kitchen. They typically have a more relaxed design with modern touches. This is a perfect choice for you if you’d like to have the combination of a traditional look and modern features.
3. The contemporary style often makes the best looking kitchen faucet a bold statement in the kitchen decor. It can have the most complicated lines, shapes and forms and it’s sure to draw a lot of attention.

There are also farmhouse faucets that are similar to traditional faucets but come in richer and more vintage finishes, which can include oil rubbed bronze, copper or brass.

Anatomy Of a Kitchen Faucet

No matter if it’s a simple or a fancy kitchen sink tap, they all come with certain basic elements. So here are the basic kitchen faucet parts.

1. Faucet body. The part that blends hot and cold water, transporting it from the plumbing system to the spout.
2. Spout. The opening that delivers water from the body to the sink.
3. Lever. It’s used to open and close the valve.
4. Aerator. A small mesh screen that pushes the water flow into multiple small streams. It significantly reduces the flow rate and prevents splashing.
5. Valves. They control the flow rate and temperature.
6. Hot and cold water supply lines. They connect to the household’s hot and cold water pipes.

Types Of Kitchen Faucets

1. Single-Handle Faucets

Also sometimes a single hole kitchen faucet, this type of faucets installs on a 1-hole kitchen sink. They also look great mounted on the countertop with an undermount kitchen sink. This makes it easier to install them and leaves more free space than with 2-handle faucets.

The single lever can be located either on the side of the faucet or next to it. It operates water pressure and both hot and cold water. Kitchen faucets with a single lever design can come in traditional and contemporary styles.

Pros:

• Easier to install. Only requires one hole for installation.
• Take up less space.
• They usually have high arching designs that allow accommodating large pots and pans in the sink.

Cons:

• They don’t give quite as precise temperature control as two-handle faucets do.

2. Two-Handle Faucets

These faucets have a more traditional look. Sometimes they are also called centerset or two-hole faucets. The centerset kitchen faucets usually require 3 or more holes for the installation. They feature separate handles for hot and cold water, which can be either as part of the baseplate or be mounted separately. They can also include a sprayer but it will usually be mounted separately.

Pros:

• Slightly better temperature control than with a single lever faucet.
• A wide variety of handle options, making this design more customizable.
• It also gives the convenience of being able to still use the faucet if one of the handles springs a leak. You can just turn off the valve for the leaking handle but continue to use the faucet with the other one.

Cons:

• Two-handle faucet usually requires a more complex installation.
• Requires more holes for the installation.

3. Widespread Faucets

Widespread faucets are similar to centerset faucets. The only difference is that instead of the whole unit connecting to a single base plate, all the individual pieces are installed separately.

Pros:

• You can customize the faucet layout according to your needs or preferences.
• You can add extras, such as a soap dispenser.

Cons:

• Installation requires at least 3 holes.

4. Pull-Down Faucet

Pull-down faucets are usually designed with a high-arc spout with the head fixed in a downward position. The head can also be detached and used as an extension, which gives a bigger range of motion and further reach. Such faucets give you more flexibility for completing different tasks around the sink, for example, filling up large pots that don’t fit in the sink or directing a more focused spray for more efficient cleaning.

Pros:

• It can come in handy when rinsing dishes or the sink.
• Provides a long enough reach to all the corners of the sink.
• Allows to fill up pots that can’t fit in the sink.

Cons:

• If you have a small sink, you might find it difficult to maneuver the spray head without creating a lot of spatter.

5. Pull-Out Faucet

Don’t confuse pul-lout faucets with the pull-down ones. They usually have a shorter spout as they were made with space saving in mind. However, while being shorter in height, they offer a longer hose reach and are capable of moving in many different directions. They allow to easily fill pots that are placed on the countertop. Pull out faucets can also be handy if you have a double sink, so you can have more reach over both of them.

Pros:

• They have a longer hose, so you get more reach, even for tasks done away from the sink.
• Great flexibility.
• The shorter spout is very convenient for those sinks that don’t have much free space in or around them.

Cons:

• They have minimum design and style options.
• You might find it a hassle to have to pull out the spray head every time you need to fill a tall item. For example, since it’s so short, you might not be able to even fit a tall pitcher under it.

6. Pot Fillers

Pot fillers are typically installed in restaurants and different other commercial businesses mounted over a sink or a stove. They feature a long, thin spout, which swings out on a jointed arm for filling deep basins. When not in use, it folds back against the wall so it can stay out of the way.

Pros:

• It’s commonly installed over the stove, so you can fill the pot directly it will be cooking, without having to lug heavy pots of water from the sink to the stove.
• Great for filling up big pots or pans that don’t fit in the sink.

Cons:

• It requires a more complicated installation that with standard faucets. It must wall mounted and if you plan to have it over your oven, you need to extend there your plumbing fixtures.
• If you’re not a serious cook, you might find this feature unnecessary.

7. Commercial Kitchen Faucets

If you want nothing but the best, consider getting a commercial style kitchen faucet. They are not meanly only for restaurants, but can also become a great functional fixture in your kitchen. They look sleek and offer professional features in terms of advanced design and technology.

Pros:

• Available in a variety of styles.
• Are usually bigger in size than regular faucets.
• Capable of handling heavy-duty jobs and volumes.
• Usually, come with advanced features.

Cons:

• The price tag is usually higher in comparison to other home kitchen faucets.

8. Prep or Bar Faucets

A prep or bar faucet is just a smaller version of your regular kitchen faucet. It’s designed for installation in secondary kitchen sinks. For example, it can be installed if you have an extra sink in your kitchen island. This will help to separate your fresh veggies in the bar sink from dirty dishes in your other sink. When choosing one of these, try to find one that matches the style of your main sink.

Pros:

• A great option for your smaller bar sink.
• You can connect it to a filtered water dispenser.

Cons:

• If space is of great importance to you, consider if you really need this extra faucet.

9. Touchless Faucets

Automatic faucets are equipped with a proximity sensor, which activates the valve opening mechanism and allows the water to flow in through the tap. So you can turn the water on and off by just waving your hand in close proximity in front of the faucet. You do also get the option of using the lever but it helps to eliminate leaving dirty fingerprints on the faucet. This means fewer germs and dirt being tracked between you and your family.

Pros:

• Hands-free operation of the faucet, which is handy when you’ve got your hands full or dirty.
• Allows keeping your faucet clean.

Cons:

• The addition of this feature results in the faucet being more expensive in comparison to the average price of kitchen faucets.

10. Touch Sensitive Faucets

These faucets are designed with a touch sensor, so instead of motion, they are activated with a simple touch anywhere on the faucet. This is also handy when you’ve got your hands full or your fingers are messy because you can simply tap with your wrist or forearm and you’ll get a flow of water.

Pros:

• Convenience for when your hands are full.
• Allows keeping your faucet cleaner.

Cons:

• You still need to touch the faucet to get the water flowing and this can leave spots on the spout.

11. Faucet Water Filter

If you’re worried about toxins and contaminants in your household’s drinking water, consider installing a new kitchen faucet with a filter. They come in a variety of styles and with different filtering capabilities. Choose one according to which impurities you need to filter out in your drinking water and then select a style that would match your kitchen’s decor.

12. Side Sprayer

You can also install a side sprayer as a separate fixture next to your kitchen faucet. You will need to an extra hole for the installation but it can become a great handy addition. It will make it easier cleaning and filling big pots and pans when you need that extra reach.

Types Of Kitchen Faucet Mounts

Wall-Mounted

As the name suggests, this type of installation involves mounting the faucet on a wall. It can be mounted either above a sink or the oven. These are mostly used as pot fillers or utility faucets in the laundry room. Since they give you more clearance under them, it makes it convenient for filling larger pots and pans. People often choose this type of kitchen faucets when they have an undermount sink or if they have a sink with no holes.

Pros:

• Has a minimalistic look.
• Such faucets are easy to clean and maintain.
• Can accommodate large pots and pans.
• Gives more space in the sink.
• As it’s placed high above the sink, the faucet gets less water splashed on it.

Cons:

• Installation requires accessing plumbing lines from within the walls.
• To repair any leaks of the faucet, you’ll need to break the wall for accessing the plumbing fixtures.
• Requires a large sink, as otherwise there’ll be water splashing all over the place.
• Most of them don’t look very stylish. They look like something that belongs more in the bathroom shower or on top of a bathtub than in the kitchen.

Deck-Mounted

Deck-mounted faucets are installed on a single plate. It’s also called the escutcheon. On the plate, you can mount either your 1-hole faucet or a 3-hole faucet with different holes for the spout, levers and a side spray.

Pros:

• Provides a seamless look, covering up all the holes in the sink, including any that you might have left out in the sink.
• Easy to install.
• Can be installed on a kitchen sink.
• These faucets are available in a vast range of styles and designs.

Cons:

• The mounting of the faucet requires a flat surface.

Non-Deckplate Faucets

Non-deckplate faucets install directly on the sink or the countertop right behind the sink, without the use of any plate. The spout and handles can be spread apart. When choosing one of these faucets, check first how many holes your sink already has. If there’s only one hole, drilling extra holes in the sink or countertop will cost more money. So it’s better to just choose a 1-hole faucet instead.

Pros:

• Easy installation.
• You can replace separate parts without having to replace the whole fixture.

How Many Holes?

When picking a new kitchen faucet, make sure that you know how many holes your sink has. It’s easier to buy a kitchen faucet with the same amounts of holes required than to drill new ones.

1. 1-hole. This is an increasingly more common option as it gives a simpler and cleaner look. In this case, the handle is usually located on the stem of the faucet and is used for both pressure and temperature adjustments.
2. 2-hole. One hole can accommodate the faucet, while the other can be for a soap dispenser, side spray or just a separate handle.
3. 3-hole. This option is commonly present in older kitchens. It’s designed for traditional faucets that have separate hot and cold levers.
4. 4-hole. With such setup, you can install a traditional two handle faucet and an extra accessory, such as a side spray.

Check The Water Lines

Before choosing a certain faucet, make sure that it’s compatible with your existing water supply lines. So take a look under your sink and note the existing water line and water shutoff valve sizes. When selecting a faucet, look for those sizes. Most new kitchen faucets come with ⅜” flex lines. If you have an old valve and it’s ½”, it’s better to replace it with a new valve.

Valve Types

The valve is usually the first component that starts to wear down. That’s why the top kitchen faucets all comes with a reliably durable valve. There are four types of kitchen and bathroom faucet valves:

Compression Valve

They usually have separate hot and cold water handles. This is the oldest type of the valve, which can be mostly found in older homes. There are also updated versions of compression valves, but they are usually used only in utility sinks. They work by turning a screw-like handle, which presses the valve seat against a rubber washer. Compression faucets are usually inexpensive but they also tend to wear out the fastest.

Ball Valve

These faucets usually have only one lever, which moves over a ball-shaped cap. The ball can be made either of plastic or metal. It also has slots and is equipped with rubber O-rings and seals. So by moving the lever back and forth or side to side, the ball valve controls the flow and temperature of the water. Their advantage is that they don’t have any washer. However, they do have more parts, which quite often leads to leaks.

Ceramic Disc Valve

They also feature only one lever and have a wide cylindrical body. It’s the latest technology developed for modern faucets. It features a pressure balance cartridge, where the hot and cold water mixes together. There are also two ceramic discs that slide across each other and control the volume of the water flow.

This faucet construction is considered to be the most durable. However, if something does go wrong, their repair is usually more expensive in comparison to other types.

Cartridge Faucet Valve

These faucets use a brass or a plastic cartridge instead of the washer system. So they aren’t as weak as the washers and not as complex as the other types. This makes it easier to repair these faucets in case something goes wrong.

Faucet Size

Size is another important aspect of the kitchen faucet that it’s worth checking before buying a new best kitchen sink faucet. First of all, make sure that the size is functional. Secondly, it should look balanced in proportion to the sink. It shouldn’t visually overpower a tiny sink or look odd in a large sink.

Height

You should also compare kitchen faucets by their height. Check for the height from the deck to the top of the faucet or from the deck to the spout. An ideal kitchen faucet should give provide you with adequate space under it for accommodating any items that you’ll be washing or filling in the sink. With a higher spout, you’ll be able to fit under it larger pots or pans. However, if you have a shelf above the sink, make sure that the faucet will be able to fit under it.

Reach

Another often overlooked measure is the reach of the kitchen tap. Faucet’s reach means the horizontal distance from the spout to the point of installation in the sink or countertop. It shows how far the faucet extends into the sink, so it determines how much coverage it will have over the sink basin. You also need to know your sink’s size, so you can choose a kitchen faucet with the right reach without the water splashing back or forward over the sink.

Also, if you have a double-basin sink, you’ll need a long reach kitchen faucet. In this case, you can get a pull-out or a pull-down faucet, so you can extend it out while the spout will remain in place.

Clearance To Backsplash

Check the faucet’s specifications for any recommendations of a minimum distance to the backsplash. There should be enough kitchen faucet clearance for the handle to be able to fully rotate. Alternatively, you can choose a faucet with a handle that rotates only forward.

Spread

The spread is the distance between the farthest holes of the faucet. The most common spread that you’ll find on kitchen faucets is 8”. So check that your sink’s holes have the same spread. You can also find some kitchen faucets with flexible water lines, which gives a bit of variance in the spread.

Kitchen Faucet Spout Types

1. High arc. These are also sometimes called the gooseneck faucets. They are available in a variety of sizes and shapes that will add an elegant note to any kitchen decor. The high arc of the spout allows placing large pots and pans under the faucet for their easy cleaning or filling.
2. Pull-down or pull-out. These faucets have an extending spray head that provides a longer reach of the water spray. You can also usually choose between spray patterns, which are controlled with a button on the wand.
3. Bridge. We’ve mentioned this type of faucets above. They feature a design, in which the levers and the spout branch off of one part.

Faucet Finish Technologies

The faucet’s finish is its coating. The variety of finishes offers different metals and colors, as well as a variety of textures. A good finish serves two purposes: decorative and protective.

Keep in mind that two faucets might look identical but they could have had a different process by which the finish was applied. Depending on the process, the faucet can be more or less resistant to corrosion, tarnish and discoloration. So to get the best value kitchen faucet, check the finish technology that was used.

PVD

One of the new processes that are commonly used for applying the faucet finish is the PVD (thin film physical vapor deposition) method. In the process, atoms of the metal to be used as coating mix with various reactive gases and then the resulting color deposits in a very thin layer on the faucet. Since the coating bonds to the faucet’s surface on a molecular level, the created finish is very tough and durable. In different tests, it was found to be 10-20 time more scratch resistant than chrome electroplated finish.

PVD can be used to apply metal coating even on plastic faucets. So even inexpensive kitchen faucets can get a nice sleek look. The coating is usually done using titanium, zirconium or chromium. Then, by adding a varying mixture of reactive gases, the coating can produce different colors of the finish.

The downside of PVD is the cost since it requires expensive equipment and the whole process is quite slow. So can expect to mary for a faucet with a PVD finish.

Electroplating

This is the old standard of faucet finishes. In this process, the faucet along with the metal coating is first immersed in an acid bath and then by applying an electrical charge to both of these, the metallic ions are transferred from the metal coating to the faucet’s surface. For thicker plating, the faucet is left immersed in the solution for longer. For thinner plating, on the other hand, the faucet is taken out after a few minutes.

One of the downsides of electroplating is that it’s difficult to determine any defects or very thin coating just by visual inspection. So you have to look towards reliable kitchen faucet brands that offer a good warranty along with their products.

Powder Coating

Powder coating involves applying a pigmented finish, which is first sprayed at the faucet and then baked at high temperatures. While baking, the powder particles melt and bind to the metal of the faucet.

Faucet Finishes

Not all finishes are made equal. Some are tougher than the others and some require more maintenance than the others. As a rule of thumb, choose a finish that matches the kitchen cabinet hardware. However, if you plan on replacing the hardware, your options are wide open. The most popular choice, though, is chrome as it’s the most durable, the easiest to keep clean and easily matches with other fixtures.

Metal Finishes

1. Chrome. The most common metal finish. It’s inexpensive, durable and doesn’t require much maintenance. A polished chrome faucet also has a lustrous look, enhancing the decor of any contemporary kitchen. You can also find faucets with brushed and matte chrome finishes, which will also go with most kitchen styles.
2. Polished nickel. For those who prefer a shiny finish, there’s polished nickel. It can look great in a variety of kitchen settings, including contemporary and traditional kitchens.
3. Brushed nickel. For those who like a softer metallic look, there is brushed nickel. Brushed nickel, however, doesn’t go well with other stainless steel fixtures but can also work with almost any style. The advantage of brushed nickel is also that it’s more durable and is fingerprint and water spots resistant (check our brushed nickel vs chrome comparison).
4. Oil-rubbed bronze. This finish gives the faucet a more traditional look and can be used in the country or rustically styled kitchens. It’s a bit more expensive than nickel and brass but it’s also durable and has good resistance to fingerprints and water spots.
5. Satin bronze. This finish has a more subtle color, which makes it easier to fit it with different kitchen styles and settings. It’s also durable and easy to maintain but it’s usually more expensive and there are fewer options for faucets with this finish.
6. Copper. It offers natural antibacterial properties and also has the ability to heal itself. A scratch with time becomes darker and blends with the patina. It ages naturally, eventually becoming a beautiful patina. However, it does require more maintenance and is limited in styles in can work with.
7. Polished brass. It’s a durable finish that is easy to clean and match with other fixtures.
8. Satin brass. It offers a nice accent color without being too showy. It also requires less maintenance, but is more expensive and is limited in the styles of fixtures it can match with.
9. Stainless steel. It’s a great match for the stainless steel sink and other stainless fixtures in your kitchen. It also doesn’t show spots easily but is usually more expensive.

Painted Finishes

Faucets can also be finished in different colors of the rainbow. The most common colors are matte black and white. You can choose these finishes to match the kitchen sink, furniture or other accent pieces. However, keep in mind that most non-metallic finishes are brittle since they don’t bond to the underlying metal at the molecular level. As a result, without proper care, they can start to chip.

Ceramic And Glass Faucets

You can get an enamel faucet to match your enamel sink. The glass enamel can also be used to coat a metal faucet.

What Are the Faucets Made Of? Kitchen Faucet Materials

Most faucets are made of brass, which is an alloy of copper and zinc. It is the material of choice as it has good resistance to corrosion and hard water calcification. The downside of this material, however, is that it leaches a small amount of lead into the water.

After the regulations took effect, manufacturers have either decreased or eliminated altogether the lead. So a lot of companies started using plastic for the faucet body. It might be considered of inferior quality but it does give a lead-free faucet.

Think About Water Usage

When fitting your kitchen with a new faucet, don’t forget to consider also its water usage. A typical kitchen faucet uses about 30% of the household water, it’s important to choose a fixture that was designed with water conservation in mind. With the increasing global environmental issues, it’s important to cut down on your water use. Additionally, saving water will also help you to cut down on your utility bills.

According to EPA regulations, the maximum water flow a faucet can have is 2.5 GPM. In some states, it’s even lower. So when buying a new faucet, make sure that the product is compliant with these regulations.

Look for the WaterSense certification, which is the EPA’s stamp of approval. On some of the most efficient faucets, you can also find the CALGreen certification, which means that the fixture has an even lower flow.

These water efficient faucets are equipped with an aerator that provides a boost of the flow. So you get a full-flow feeling but use less water.

All of the kitchen faucets we’ve mentioned in this review have a water flow of 1.8 GPM or lower.

ADA Compliance

All the faucets mentioned in our best rated kitchen faucets list are also ADA compliant. It refers to government legislation requiring accessibility for people with special requirements. So if a faucet is ADA compliant, it is can be operated with one hand without much force and twisting. It means that the faucet meets the standards for accessible design.

Price

Price is usually a good measure of quality. So don’t fall at once for the cheap kitchen faucet. However, it’s not always the best measure.

Choosing a cheap kitchen faucet might get the job done just fine but they won’t last as long and won’t offer any advanced features. In the mid-to-high price range, you can find better quality, nicer designs and more functional features. At the other end of the spectrum, you can find products from luxury kitchen faucet brands. These faucets will have all the extra bells and whistles. They might seem nice but not necessary.

Warranty

Replacing a kitchen faucet is a hassle. You don’t want to end up with a leaky faucet soon after the installation, with your cabinets soaked and the kitchen a mess. You also don’t want to be paying for a new faucet within a few years of buying the first one. So when choosing a kitchen faucet, also check for the warranty.

Some of the best faucet brands even offer limited lifetime warranties, which is a sign that they are sure of the quality of their product. The best kitchen faucet brands usually have a good reputation and their products are usually backed by a strong warranty.

What Is the Best Brand Of Kitchen Faucets?

The kitchen faucet market is dominated by a few key brands. There’s also an endless variety of other brands but choosing a product from the most reputable brand, you’re usually choosing the best value. So here are some of the most popular kitchen faucet brands.

1. Delta. This brand offers one the widest selection of faucets, available in anything from modern to classic styles and finishes. Delta offers some of the most technologically advanced faucets with features such as Touch2O, Diamond Seal, MagnaTite docking and other technologies. They have a solid reputation for quality and most of their products manage to get 5-star reviews.
2. Danze. This is one of the more recent brands, introduced to the market in 2001. They also have a great reputation for their innovation without compromising on quality or design. Over the years of their work, they’ve won several awards for their designs. However, most of their products come in only chrome and stainless finishes, so you might not find such an extensive range of finishes as with other brands.
3. Moen. For a long time, it has been considered one of the top kitchen faucet brands in North America. They deliver long-lasting products with innovative technologies. One of their best innovations is the Motion Sense technology that allows motion activated water flow control. Their faucets are also highly efficient, come in a variety of nice designs and are protected with a limited lifetime warranty against leaks and defects.
4. Kohler. This is one of the oldest brands in the industry that now offers a wide range of products. You can find a great kitchen faucet in almost any price range with a variety of styles, finishes and functions. Some of their best technologies include Master Clean, Pro-Motion and Temperature Memory technologies.
5. Kraus. This is also one of the top rated brands that are known for both traditional and modern style faucets. They have a wide range of products, including pull-out and pull-down faucets. The brand makes ergonomic and elegant designs with the durability of commercial faucets. Their faucets also come with cutting-edge technologies and lifetime support.
6. Grohe. This brand has acquired lots of awards for their beautifully designed faucets. They also offer the best line of commercial faucets. Their products are built from solid quality materials, they provide good water pressure and last a long time. The top of the line kitchen faucets that they offer also come with different advanced technologies, such as Touch technology, EcoJoy and Silk Move.
7. Pfister. Another brand that’s been on the market for a long time is Pfister. Except for the faucets, they manufacture a wide range of other equipment in the industry. They produce high-quality faucets with great functions and designs.
8. American Standard. Their range of products includes mostly more simply faucets that at the same time have all the functionality and different innovations. Their faucets are reasonably priced but they offer that without sacrificing quality and functionality.
9. Brizo. The brand offers a luxury line of faucets. They’ve invested a lot in providing the best technologies and most beautiful designs. Their products are known for eco-friendliness and aesthetically pleasing designs.
10. Kingston. Most of their faucets are made from solid brass, which shows their solid quality and durability. They boast the widest selection of faucets, so you’ll be sure to find the kitchen faucet style and finish to match that of your kitchen’s decor.

You can also check out our comparison of the top 3 most popular kitchen faucet brands – Moen vs Delta vs Kohler.

How To Install or Replace a Kitchen Faucet

With a few common tools, anyone can replace or install a new kitchen faucet without any plumbing experience. So if you’ve decided to update your faucet on your own, you can follow this set of instructions.

Tools You’ll Need

• Adjustable wrench
• Pipe wrench
• Small bucket
• Plumber’s tape
• Putty knife

How To Remove the Old Faucet?

1. Clear out any products under the sink. If you have any electrical outlets under the sink, make sure to turn off its power.
2. Shut off the hot and cold water supply valves. If you don’t have stop valves, you’ll need to shut off the water supply to the entire house.
3. Turn on the faucet, which will relieve any pressure in the lines.
4. Disconnect both supply lines with the use of an adjustable wrench. If your supply lines are old, consider replacing them with new flexible supply lines.
5. Use a basin wrench to loosen the nuts holding the faucet in place under the sink.
6. Remove the faucet.
7. Before installing the new faucet, clean the surface of the sink, removing any grime or sealant that is left behind.

How To Install a Kitchen Faucet?

The following guide is for informational purposes only. Various faucets can have different configurations and different installation requirements. So check the manufacturer’s installation manual for proper instructions for your specific product. For this guide, we’ll explain single handle centerset faucet installation.

1. Measure the distance of the outside holes in your sink. Make sure that this spread matches your faucet’s.
2. If you’re using a gasket, placing over the faucet holes in the sink. Set the deck plate over the gasket so that it would cover all the holes. Check your kitchen faucet manufacturer’s instructions if you should also use caulk or plumber’s putty for the gasket installation.
3. Slide through the escutcheon plate the supply lines, positioning the shank of the faucet on the mounting surface.
4. Install washers and nuts underneath the sink. Tighten down the mounting screws, so the faucet would sit tightly against the underside of the cabinet.
5. Next, connect the built-in supply lines of the faucet to the corresponding hot and cold water supply valves. However, do not tighten these connections too hard. Keep in mind, also, that some faucets don’t come with the built-in supply lines and only feature a threaded nut, to which you’ll need to attach your own supply lines.
6. If necessary, use plumber’s tape to wrap it around each of the threads.
7. Turn the water on and carefully check for any leaks. If you’ll find a drip, tighten the connections until the leak stops.
8. After completing the installation process, flush out any debris that may have accumulated in the lines. To do this, remove the aerator from the faucet, clean it if necessary, and then let the water run for a few minutes. Recheck everything for leaks and place the aerator back into the shaft of the faucet.

Wrap Up

As you can see, there’s an extensive list of considerations that you should take into account when choosing the best kitchen faucet for your home. However, by choosing among the top rated kitchen faucets helps to narrow down the vast variety of options. If you’re also wondering where to buy kitchen faucets, try to check around for the best price on kitchen faucets. Online stores often have the lowest prices and good delivery options.

So we hope these latest kitchen faucet reviews will guide you in the right direction in choosing a product that will both compliment your kitchen and offer you maximum functionality. The products we’ve chosen for our kitchen faucet comparison were picked based on consumer reviews, their ratings, quality and performance.