How To Install A Pur Water Filter On A Pull Out Faucet?

Turn off the water to your faucet. Unscrew the aerator from the end of your faucet. Screw the adapter that comes with the PUR faucet filtration system onto the faucet. Push the PUR filter into the adapter until it clicks.

1. Locate the holes on the back of the faucet. There should be two of them.
2. Take the Pur water filter and unscrew the cap at the top.
3. Screw the filter onto the faucet until it is hand-tight.
4. Place the diverter valve into one of the holes on the back of the faucet.
5. Push the valve in and turn it clockwise until it is tight.
6. Run water through the filter for about 5 minutes to rinse it out.
7. Your Pur water filter is now installed and ready to use!

How Do I Install A PUR Water Filter On A Pull Out Faucet?

To install a PUR water filter on a pull out faucet, first remove the faucet’s aerator, then screw on the adapter ring that comes with the filter.

1. Remove the existing aerator from your faucet. To do this, unscrew the aerator counterclockwise.

2. Clean the threads on the faucet with a clean cloth. This will help ensure a good seal.

3. Place the O-ring (included in your PUR FM-9400 or FM-9400B Faucet Mount) onto the faucet.

4. Screw the faucet mount onto the faucet, tightening it by hand.

5. Place the diverter valve into the faucet mount.

6. Screw the diverter valve onto the faucet mount, tightening it by hand.

7. Place the washer (included in your PUR FM-9400 or FM-9400B Faucet Mount) onto the diverter valve.

8. Tighten the diverter valve with the wrench (included in your PUR FM-9400 or FM-9400B Faucet Mount).

9. Turn on your faucet to the cold position.

10. Place the end of the filter housing into the diverter valve.

11. Turn the filter housing clockwise to screw it into the diverter valve.

12. Run water through the faucet for five minutes to prime the filter.

13. Enjoy! Your PUR FM-9400 or FM-9400B Faucet Mount is now installed and ready to use.

What Are The Steps To Install A PUR Water Filter On A Pull Out Faucet?

To install a PUR water filter on a pull out faucet, unscrew the faucet’s aerator, screw on the adapter ring that comes with the filter, and then screw the filter onto the adapter.

1. Unscrew the cap from the water filter pitcher and remove the filter.

2. Find the adapter ring that came with your PUR water filter pitcher. If you can’t find it, you can purchase one at a hardware store.

3. Screw the adapter ring onto the end of your faucet.

4. Insert the filter into the adapter ring.

5. Screw the cap back onto the water filter pitcher.

6. Place the water filter pitcher under the faucet and turn on the water.

7. Allow the water to filter into the pitcher for about 5 minutes before discarding the water.

8. Your PUR water filter pitcher is now installed and ready to use!

Here is a video showing the process: https://www.youtube.com/watch?v=YH4N2BKUUzk

Is It Difficult To Install A PUR Water Filter On A Pull Out Faucet?

No, it is not difficult to install a PUR water filter on a pull out faucet.

Installing a PUR water filter on a pull out faucet is not difficult, but there are a few things to keep in mind. First, make sure that the O-ring is properly seated in the groove on the bottom of the filter housing. Next, hand-tighten the housing onto the faucet until it is snug. Finally, use the wrench to tighten the housing an additional 1/4 turn.

If you’re not sure whether your O-ring is properly seated, you can always check the manufacturer’s website for instructions. In most cases, though, simply making sure that the O-ring is in place and hand-tightening the housing is all that is needed.

Once your PUR water filter is installed, be sure to flush it according to the manufacturer’s instructions. This will remove any debris or contaminants that may have been left behind during the installation process.

Why Should I Install A PUR Water Filter On My Pull Out Faucet?

The PUR water filter will remove impurities from your water, making it healthier to drink.
There are many reasons to install a PUR water filter on your pull out faucet. Here are just a few:

1. PUR filters remove over 70 contaminants from your water, including lead, mercury, and chlorine.

2. PUR filters improve the taste and smell of your water.

3. PUR filters can save you money on your water bill.

4. PUR filters are easy to install and replace.

5. PUR filters provide you with peace of mind, knowing that you and your family are drinking clean, healthy water.

Installing a PUR water filter on your pull out faucet is a great way to improve the quality of your water and the health of your family.

What Are The Benefits Of Installing A PUR Water Filter On My Pull Out Faucet?

PUR filters remove over 70 contaminants from your water, including lead, mercury, and pesticides.
There are many benefits of installing a PUR water filter on your pull out faucet. Here are just a few:

1. PUR water filters remove over 70 contaminants from your water, including lead, mercury, asbestos, and chlorine.

2. PUR water filters improve the taste and smell of your water.

3. PUR water filters can save you money on your water bill by reducing the amount of water you need to purchase.

4. PUR water filters are easy to install and require no tools.

5. PUR water filters come with a satisfaction guarantee, so you can be sure you’re getting the best possible product.

If you’re looking for a way to improve the quality of your water and save money, a PUR water filter is a great option.

FAQ

Hopefully, you are clear now on how to install a pur water filter on a pull out faucet. If you still have any questions, feel free to comment below.