In the process of home renovation or construction, a lot of people tend to overlook bathroom faucets. However, installing the right bathroom faucet will increase the efficiency of water use and improve the aesthetics of your bathroom. Though when it comes to faucets, there’s such a wide range of options available that choosing the right one is not as easy as it seems. That is why we have taken the time to research the best bathroom faucets on the market. So below we’ve compiled bathroom faucet reviews of top 6 products available on the market in 2021.
Disclaimer: faucetsrated.com is supported by its audience. When you purchase through links on our site, we may earn a small commission at no extra cost to you.
- KES L3109ALF-CH
- Material: brass
- Finish: brushed nickel, chrome, gold, silver, oil-rubbed bronze
- Spout reach: 5.3"
- Height: 6.5"
- Installation: 1 hole
- Flow rate: -
- Moen Eva 6410BN
- Material: metal
- Finish: brushed nickel, chrome, oil-rubbed bronze
- Spout reach: 4"
- Height: 6.19"
- Installation: 3 hole
- Flow rate: 1.5 GPM
- Pfister LF042JDKK Jaida
- Material: metal
- Finish: brushed nickel, polished chrome, tuscan bronze
- Spout reach: 4-7/16"
- Height: 2-23/32"
- Installation: 1 or 3 hole
- Flow rate: 1.2 GPM
- Moen Brantford 6610
- Material: metal
- Finish: brushed nickel, chrome, oil-rubbed bronze
- Spout reach: 5.06"
- Height: 3.88"
- Installation: 3 hole
- Flow rate: 1.2 GPM
- American Standard Reliant
- Material: brass
- Finish: polished chrome, satin nickel
- Spout reach: 4-7/8"
- Height: -
- Installation: 3 hole
- Flow rate: 1.5 GPM
- KOHLER K-394-4-SN Devonshire
- Material: brass
- Finish: polished chrome, oil-rubbed bronze, vibrant brushed bronze, vibrant brushed nickel, vibrant polished brass, vibrant polished nickel
- Spout reach: 6-3/8"
- Height: 4-3/4"
- Installation: 3 hole
- Flow rate: 1.2 GPM
Table of Contents
- 1 Best Bathroom Faucet Reviews – Top 10 Products
- 2 KES L3109A1LF
- 3 Pfister LF042JDKK Jaida
- 4 Moen Eva 6410BN
- 5 Moen Brantford 6610
- 6 American Standard Reliant 3
- 7 KOHLER K-394-4-SN Devonshire
- 8 Types of Bathroom Faucets
- 9 Valve Type And Configuration
- 10 Material
- 11 Bathroom Faucet Finishes
- 12 Style
- 13 Other Things to Consider When Choosing the Best Bathroom Faucet
- 14 How To Install a Bathroom Faucet?
- 15 Bathroom Faucet Brands
- 16 Wrap Up
Best Bathroom Faucet Reviews – Top 10 Products
If you’re looking for the best waterfall bathroom sink faucet, a great option is the KES L3109A1LF model. It’s made of solid brass, ensuring long lasting use. KES is known to test their faucets at high water pressure, making sure of the high quality and durability of their faucets.
The faucet features a sleek modern design with an extra large rectangular spout and a single lever. It comes in a beautiful chrome finish but there are also other options available, such as silver, oil-rubbed bronze and brushed nickel. So you can choose the appropriate finish to match the setting of your bathroom. The finish coating is applied with the technology to provide resistance to corrosion and tarnishing.
This KES faucet features a ceramic cartridge that has been tested to last up to 500,000 times of opening and closing. The cartridge is designed to prevent unwanted leakages.
Installing this bathroom faucet is a simple task. You’ll probably spend more time removing your old faucet than installing the new one. It comes with all the mounting hardware, as well as the cold and hot water hoses, included in the package.
This bathroom faucet has received a lot of positive reviews for its solid look, quality feel and great performance. Some of the users have only complained about getting too much splash in their small sink because of the design of the tip. However, you can adjust the valves under the sink to prevent too much water flow. Another thing worth mentioning is that it doesn’t come with a deckplate, so if you have more holes than one in your sink, you’ll need to purchase a separate plate.
Pfister LF042JDKK Jaida
Another great single handle bathroom faucet is the Pfister LF042JDKK Jaida. The Pfister brand is known for its high quality and exquisitely designed products. It delivers these qualities also with this Jaida bathroom faucet.
It features a simple, yet elegant design with soft, sleek lines. This faucet is designed to nicely complement its surroundings. You can also choose from three available finishes: polished chrome, brushed nickel and Tuscan bronze.
The waterfall style spout delivers a relaxing stream of water. A restrictor limits the water flow to 1.2 GPM. So over the course of time, it will save you quite a lot of water. The product is also compliant with different regulations, including EPA WaterSense standards, ADA, CALGreen.
The faucet features the Pfister’s trademark Pforever seal. Pfister is so sure of their advanced ceramic disc valve technology that they offer a lifetime warranty against any leaks.
The product also comes with a push and seal drain, designed to make it easier to seal and release the water in the sink.
You can install it with or without the deckplate and it’s compatible with 1 and 3-hole installation. Pfister made the installation as easy as possible, so most people will be able to get it done without any plumbing experience or extra tools.
As with the KES bathroom faucet above, this product doesn’t provide an aerated stream of water. So it might not be the best choice for those that prefer having more water pressure.
Moen Eva 6410BN
The next product on our list of the best bathroom faucets comes from one of the most known brands in the industry. This two-handle centerset lavatory faucet features a swan-like spout and petal-like levers with clean edges and curved lines. It will make a stylish addition to any bathroom and its design will stay fashionable for the years to come.
The faucet can be purchased in brushed nickel, chrome and oil-rubbed bronze finishes. However, keep in mind that brushed nickel comes with a LifeShine feature. This finish combines the look of brushed nickel and the durability of chrome. It will withstand heavy everyday use without starting to corrode, tarnish or flake.
The aerated stream of this faucet delivers up to 1.5 gallons of water per minute. Moen Eva meets EPA WaterSense criteria for water efficiency, so with this faucet, you get good water pressure while also conserving water. By saving energy in our everyday lives, we create a healthier place for us to live. Eva faucet is also ADA compliant, which means that it has an ergonomic design accessible for people with disabilities.
This is a 4-inch centerset faucet that requires 3 holes for the installation. So make sure that your sink also has this configuration as it’s usually not the easiest or cheapest idea to drill new holes.
Moen Brantford 6610
One of the best rated bathroom faucets is also the Moen Brantford 6610. It’s a two-handle low arc faucet, which combines a timeless look and strength. It’s designed in traditional style and is available in 3 finishes: chrome, brushed nickel and oil-rubbed bronze. So you can choose the finish that will match your bathroom fittings. The chrome finish gives the most eye-catching look, while brushed nickel has a warm stainless steel appearance.
The two lever design allows to easily adjust pressure and temperature to the desired levels. This bathroom faucet also meets the WaterSense criteria, delivering the maximum water flow of 1.2 GPM. It provides an aerated stream, so while using less water, it delivers more pressure.
The spout reaches out to 5.06 inches, which should give good clearance for most sinks. However, some people have commented that the faucet was covering half of their sink. So keep that in mind if you have a really small sink.
Similar to Moen Eva, this is a 4-inch centerset faucet that mounts on a 3-hole sink. The installation process is quick and easy. It’s also compatible with most bathroom fittings.
In the package, Brantford includes hot and cold cartridges, lift rod and drain assembly.
American Standard Reliant 3
If you’re looking for a reliable bathroom faucet that won’t break the bank, consider the American Standard Reliant 3 model. It features an all-metal design, making solid for long lasting use. Moreover, the ceramic disc valves wear out much less in comparison to other materials. It provides a tight seal and prevents leaks.
This bathroom faucet features a single lever design that makes it look modern and unobtrusive at the same time. The two available finishes include polished chrome and satin nickel. So you can choose the look that will be more appropriate with the existing fixtures in your bathroom.
The Reliant 3 also features a Hot Limit Safety Stop feature, which restricts the amount of hot water that can mix with cold water. This feature is designed to prevent accidental scalding, which is a good feature to have in homes with kids.
Reliant 3 is probably one of the easiest bathroom faucets to install. It comes with a pre-assembled drain, which offers an easy one-person installation. The faucet just drops into place and then secure spin nuts secure it in place. The faucet also comes with a flexible stainless steel cable and ⅜-inch compression connectors.
This is also a water conserving bathroom faucet and to certify that it carries the EPA’s WaterSense label. It delivers 1.5 GPM water flow and uses an aerator to create more pressure. The faucet also meets ADA guidelines, meaning that it’s completely safe to use.
The downside of this faucet, however, is that there’s only a limited selection of finishes available. This limits the choices of bathroom fittings it can go with.
KOHLER K-394-4-SN Devonshire
KOHLER has been in the industry for a long time and their products are renowned for high quality and durability. The Devonshire bathroom faucet is a good example of it. However, it also comes at a higher price tag than the other mentioned articles on our list.
It features a stylish design that will fit well in any contemporary or traditional bathroom setting. The elegant spout and ergonomic handles make it look sleek and functional. It has 6 different finishes available, that include options from vibrant polished nickel to vibrant polished bronze. With such a variety of finishes, this faucet can easily match almost any bathroom decor.
KOHLER also makes high quality finishes, which exceed industry standards for corrosion and tarnish resistance.
The faucet is also equipped with high quality ceramic disc valves that are designed for high longevity standards. When buying such an expensive bathroom faucet like this one, it’s important to have a durable performance.
The construction of the faucet is made from solid brass, which is a good sign of durability and reliability. Also, it’s a widespread faucet, so it cat fit anywhere between 8 to 16 inches centers.
Types of Bathroom Faucets
Before we’ll go into what to look for in the best bathroom faucet, it’s important first to understand the different types of bathroom faucets. For example, what is the difference between widespread and centerset faucets? Even though bathroom faucets are not complex fixtures, knowing the differences between the available types will help you choose the right one for your bathroom setting.
This is the most common type of bathroom faucets you can find. These faucets mount on standard 3-hole sinks. The distance between the handles on these taps is 4 inches. Typically, the spout and levers are all part of one base unit. However, it can also have a single-lever design with the spout and handle mounted on a deckplate.
This configuration is often used in small sinks or in bathrooms with limited space.
Widespread bathroom faucets come in 3 separate parts. The hot and cold water levers are installed independently of the spout. The distance between the handles should be at least 6 inches.
This setup can work on sinks that have 3-holes as one will be used for the spout and two other for the levers. Widespread faucets are also often used when there are a bit more sink and countertop space.
This type of bathroom faucets is suitable for sinks with one hole. You can also install it on a sink with multiple holes but then you’ll also need to install it on a deckplate.
Single hole faucets come with the spout and handle as one unit. It can also come with two handles but the most common design is just one handle that is used for both water temperature and pressure adjustments.
Wall-mount bathroom faucets are often used over vessel type or freestanding sinks. These types of sink configurations require longer spouts with more clearance above the sink basin.
However, keep in mind that to mount on the wall this faucet configuration, you need to have water supply lines installed in the walls above the sink. If you’re doing just simple remodeling of your bathroom, breaking the wall and installing new supply lines might be too much of a hassle. Also, when buying one of these bathroom faucets, check the spout’s length to make sure that it will provide adequate sink clearance.
This is a classic type of faucet that is named after its bridge-like design. It features two separate water controls for hot and cold water that along with the spout branch off of one part. It usually requires two holes for the installation, with the two handles mounting through them.
Waterfall Bathroom Faucet
Waterfall bathroom faucets are designed to replicate the motion of falling water. Instead of the traditional cylindrical spout, the feature a uniquely shaped spout which allows the water to flow naturally. They have a unique appearance and create a relaxing atmosphere in your bathroom.
Valve Type And Configuration
Another important feature to consider is the type of valve the bathroom faucet is using. The valve is what controls the flow of water. Its quality equates to how long the faucet will be able to work before starting to drip and needing repair. There are 4 types of valve technology used in faucets, which are the following:
- Compression. This is the simplest form of faucet valve technology. It’s often used in older faucets that are designed with two handles. Each of the handles is built with a screw-like feature that compresses the seal, most commonly a rubber washer. These are considered to be the least durable and this technology is being replaced nowadays in most faucets by more reliable valves.
- Ball valves. Single lever faucets feature a ball valve. Slots in the valve control the amount of hot and cold water that goes through the spout. Changing the position of the slots also controls the water flow. This was one of the first technologies to replace the washer in faucets. However, it also has its downsides. Since it has so many little parts, the fixture is prone to developing leaks.
- Cartridge. These faucets eliminate the need for washers by installing a stem cartridge instead. The faucets usually use up and down motion for water flow control and left/right motion for temperature adjustments. They have a hollow cartridge that seals against the faucet body. Moving the faucet handles aligns a certain series of holes in the cartridge with the stem, which controls the flow of water. Cartridge faucets have fewer moving parts but they do use seals, which can also wear out over time.
- Ceramic discs. This is considered to be the most durable technology that often even come with lifetime warranties from certain brands. They feature two ceramic discs that slide relative to each other, which opens or restricts the flow of water.
On most faucets today you’ll find the ceramic disc technology. We’d also recommend looking for faucets with this configuration. Because even though it’s slightly more expensive in comparison to other types of faucet valves, it will last you much longer.
Faucets are can be made from metal alloys, plastic, brass or stainless steel. Choosing one or the other determines the quality and look of the faucet.
- Brass. This is the most popular material used in producing bathroom faucets. It combines copper and zinc alloy and can contain small amounts of other metals. Copper is known for its antimicrobial properties, which is why brass faucets have good resistance to corrosion. Today, brass faucets can have a maximum lead content of 0.25%. To comply with these regulations, manufacturers now use other additives to give the material malleability.
- Stainless steel. Look for 304 grade stainless steel, which combines chromium and nickel. It contains no lead and the nickel in it gives the material more strength and malleability, as well as a nice crystalline structure.
- Zinc/ZAMAK. Cheaper bathroom faucets often use a zinc alloy called ZAMAK. It combines zinc with aluminum, magnesium and copper. The metal itself looks dull and grey, but after coating it with a finish it looks indistinguishable from other faucets. Keep in mind that zinc is not as durable as brass and the material doesn’t do well in hostile, corrosive environments.
- Plastic. After the government’s regulations of lead content in faucets, many manufacturers started switching to plastic faucets. However, it’s generally not a suitable material for faucets as it’s not very durable. However, that being said, PEX plastic might be the exception. It has been used for many years to replace copper water pipes and in recent years also begun to be used in faucets. The benefits of PEX is the lower cost, easier installation, no lead and less chance of it bursting from freezing.
Bathroom Faucet Finishes
Finish refers to the treatment of the faucet’s surface. A good finish provides protection for the base material and also gives the faucet its stylish look. While largely chosen to match the bathroom’s design, it’s also important to keep in mind that each finish has its share of advantages and disadvantages.
- Chrome. It coordinates with a wide variety of fixture styles. It’s shiny and looks clean. It’s a classic choice that will also work for years to come. Whether your decor is traditional or contemporary, a chrome bathroom faucet will be a safe bet.
- Bronze. The most common finish of this style is the oil-rubbed bronze. It gives a more traditional feel with a nice aesthetic appeal. It’s the ideal choice if you already have other oil-rubbed bronze bathroom fixtures. On the flip side, it’s usually more expensive. However, it also doesn’t show any fingerprints and water spots.
- Nickel. It can be polished or brushed nickel. Polished nickel has a shiny chrome-like appearance, though a bit darker than chrome. It’s durable, easy to clean and has a nice smooth look. It goes well with traditional and contemporary styles. Brushed nickel has a softer tone and it coordinates with granite or slate countertops.
- Brass. This is a great option for a vintage look. Polished or antique brass adds an elegant touch to traditional style bathrooms. However, it can also provide a rich feel to a modern bathroom.
- Matte black. This color is gaining more popularity as it gives a nice eclectic look to a modern bathroom design.
- White. It has a very clean and fresh look. Also, mostly used in contemporary bathrooms. However, keep in mind that these faucets are usually made from porcelain, which is a material that has a tendency to chip.
A good bathroom faucet should not only be functional but also appeal to you visually. So after considering the configuration and construction of the faucet, think about different styles.
Bathroom fixtures are available in traditional, rustic and contemporary styles. Choose a faucet that will nicely blend with the existing design.
When considering the style of the faucet, also consider the shape and reach of the spout and the handle configuration. High arc, gooseneck spouts will give you more room in the sink.
Other Things to Consider When Choosing the Best Bathroom Faucet
Now that you know about different faucet configurations and their makeup, here some considerations that you should take into account before making a buying decision.
If Applicable, Get a Faucet And a Sink Together
In a situation, if you need both a new sink and faucet, consider buying them together so they would be compatible with each other. On the other hand, if you’re just replacing an old bathroom faucet, choose a new faucet with the same configuration as the existing sink has.
The Size Of the Faucet
Your new faucet should be able to fit in its designated space. The faucets size should also match that of the sink. A faucet that is too large will result in looking oversized and awkward. A faucet that is too small and doesn’t have enough reach, on the other hand, can end up with the water stream on the wall of the sink.
According to government regulations, manufacturers have to limit the water flow on their faucets to 2.5 GPM. This helps with water conservation and brings down the energy costs. A lot of the bathroom faucets on the market today offer even lower water flows, as low as 1.5 GPM. They use aerators, so even though the water flow is low, you get good pressure. To maintain good water pressure, the aerator needs to be regularly cleaned. Check out our guide on how to remove the aerator and clean it.
Another consideration is the hookup of the new faucet to your plumbing fixtures. Look for a faucet that is compatible with the existing water supply lines in your bathroom. You can, of course, adapt them but it’s less hassle if you can get a faucet without the need for that.
Know Your Countertop Thickness
In the bathroom faucet’s specifications can you can also find the maximum deck thickness. A certain part of the faucet has to go through the countertop and it’s usually made of a certain length. So make sure that your countertop thickness is not bigger than the specified on the product max deck thickness.
You choose single or dual handle operation. Some more advanced bathroom faucets also offer hands-free operation. Choose one that you’ll find more convenient. Hands-free bathroom faucets are more expensive but they also offer lots of conveniences.
Products that are labeled ADA compliant are designed for accessible use by those who have limited hand capability. These faucets can be operated with one hand and you don’t a tight grip or to twist your hand in order to turn the lever.
Ease Of Installation
Most faucets can be installed by the owner without the use of professional help. Easy to install bathroom faucets have fewer parts and come with all the mounting hardware, which makes setting up the fixture much quicker and easier. You can read some bathroom faucet reviews to get an idea of how easy a particular faucet is to install.
Buying any product, a good thing to have is warranty coverage. Faucets are no exception. The length of the warranty is usually a good indication of the quality the manufacturer offers. Check for the warranty that covers the function, parts and finish of the bathroom faucet.
Setting a budget range will help you narrow down your choices. With hundreds of different options available, setting a maximum limit that you’re ready to spend will help you shorten this list. However, it might be tempting to buy a cheap bathroom faucet, quality usually comes with the price. There are, though, lots of good quality products in the mid-price range.
- Hands-free operation. As we’ve mentioned above, you can get an electric faucet that is activated by tapping on the spout. It can also use a motion sensor, so you don’t need to touch the faucet at all but just wave your hand in front of it. It’s a more convenient way to turn the water on and off without getting the faucet dirty with your fingerprints.
- Lead-free. Some faucets on the market today still contain trace amounts of lead, though within the limits of regulations. However, some manufacturers also offer products that are made from lead-free materials.
- Easy-clean finishes. Some of the brands, such as Moen and Delta (check out our comparison of Moen and Delta), make their faucets with a special coating that protects the faucets from spots, damage and tarnishing.
- Pullout spout feature. This feature is mostly used in the kitchen faucets but you can also find it on some of the bathroom faucet models. Such spouts disconnect and pull out of the base, giving you extended reach of the water stream.
How To Install a Bathroom Faucet?
If you don’t have any plumbing experience, you might think that it’s impossible to install a new bathroom faucet on your own. However, most people can handle this DIY project. Here are a few simple steps that you can follow to do so.
Step 1: Preparation
Start by consulting the installation instructions provided by the manufacturer. Even though the process is more or less the same for all faucets, your particular manufacturer might have special requirements.
Before starting the installation, also make sure that you’ve got everything you’ll need. Most faucets usually come with all you’ll need to carry out this job but you might additionally need an adjustable wrench, a basin wrench, supply lines, plumber’s tape, putty knife and other tools.
Step 2: Turn Off the Valves
Clear out the area under your bathroom sink and place a bucket so it would collect any excess water. Shut off the valves or if your configuration doesn’t have shut-off valves, turn off the primary water supply.
Step 3: Remove the Old Faucet
Remove the old faucet, including its supply lines and mounting nuts. Corrosion and rust might make the nuts stiff and difficult to remove. In this case, use a wrench or apply some lubricant. Having removed the faucet, clean the mounting area with a suitable cleaner.
Step 4: Place the Faucet Gasket
The next step is to place the gasket over the faucet’s tailpieces. Slide the gasket over the supply tubes, which in turn, slide through the sink holes.
Step 5: Mount the New Faucet
Mount the faucet onto the pre-existing hole spacing in the sink. Make sure that the base of the faucet is parallel to the back of the sink. Use the provided nuts to tighten the faucet on the sink. Connect the water lines, turn the water back on and check for leaks.
Bathroom Faucet Brands
Moen. This manufacturer has been making consistently good products for many years. They have a good selection of both kitchen and bathroom faucets, as well as many other fixtures. Their faucets look elegant, have solid built quality and provide smooth operation for many years of use.
- Pfister. This is another one of the best bathroom faucet brands that have gained quite a bit of good reputation over the years of their work. They produce high quality products that are available at different price points.
- Danze. This brand is known for their innovation in both designs and technologies they incorporate in their products. If you want a faucet that will become the masterpiece of your kitchen or bathroom, take a look at the kitchen line of products from Danze. They also have a luxury line of bathroom faucets.
- Delta. Their faucets offer outstanding quality and functional designs. In Delta’s selection of bathroom faucets that will different settings, both traditional and contemporary.
- American Standard. If you want a simple quality but solidly built bathroom faucet, consider the options of the American Standard brand. They have a reputation for producing products that efficiently work over a long period of time.
We hope that after reading our bathroom faucet reviews, it’ll be easier for you to find the right fixture for your home. Keep in mind that finding the best bathroom faucet is not only getting the best looking faucet, but it should also be quality built with durable configuration and efficient functionality. Choosing a bathroom faucet by taking into consideration all its features and specifications, will help you find a faucet that will complement your bathroom design and will last you well into the future. If you’re also looking for a matching faucet for your bathtub, check out our review.